Amazon.de FBA-க்கு அனுப்புதல்: சீன சரக்குகளுக்கான உள்வரும் விதிகள்
பொருளடக்கம்
மாற்று

அறிமுகம்
Shipping goods from China to Amazon.de is no longer a matter of booking a container and hoping for the best. Since 2025, European rules on customs, தயாரிப்பு பாதுகாப்பு, and packaging have tightened quickly. As a result, a shipment that looked perfect on paper can still sit at a terminal in Hamburg or be refused at a German fulfillment center.
This guide explains how inbound shipping to Amazon.de FBA works for cargo that starts in China. We cover compliance basics, Amazon’s carton and pallet rules, customs paperwork, shipping modes, delivery appointments, and real costs. Along the way, we flag the changes that took effect in 2026, because many older tutorials no longer apply.
The advice comes from the freight forwarder’s side of the desk. At டாப்வே ஷிப்பிங், a Shenzhen-based cross-border logistics provider operating since 2010, we see the same preventable mistakes every month. Therefore, we have organised this article around the problems that cost sellers the most time and money.
What Changed for China-to-Germany Cargo in 2026
The most talked-about change is the end of the EU’s €150 customs duty exemption. From 1 July 2026, a temporary flat duty of €3 per item category applies to low-value consumer parcels sent directly from outside the EU. The measure is scheduled to run until 1 July 2028, while a wider customs reform is built.
However, this rule mainly targets direct-to-consumer parcels. FBA inbound freight is different. Pallets and cartons sent to an Amazon warehouse are commercial imports for stock, so they follow the normal customs process. That means the regular tariff for the HS code, plus German import VAT of 19%. In other words, the new €3 duty does not make FBA cheaper or simpler. It simply closes a shortcut that some sellers once used to push small parcels straight into பூர்த்தி மையங்கள்.
Several other changes matter even more for inbound planning. The table below summarises the ones we see affecting sellers most often.
| மாற்றம் | தேதி | What it means for FBA sellers |
| Flat €3 duty on low-value B2C parcels | 1 ஜூலை 2026 | Closes the small-parcel shortcut. Bulk FBA freight still pays regular duty and import VAT. |
| EU packaging regulation (PPWR) applies | 12 ஆகஸ்ட் 2026 | Packaging producers need registration. Germany expects LUCID registration and an authorised representative for foreign producers. |
| GPSR product safety rules | Applied since December 2024 | A missing EU பொறுப்பான நபர் can suppress listings and block inbound units. |
| ICS2 pre-arrival security filing | நடைபெற்றுக்கொண்டிருக்கும் | Vague cargo descriptions can lead to holds before the cargo even leaves China. |
Because the rules keep moving, treat any guide, including this one, as a starting point. Always confirm the current requirements in Seller Central before you book freight.
Build Your Compliance Foundation Before Booking Freight
Amazon.de checks compliance at several points, including the listing, the inbound plan, and the receiving dock. Customs authorities check again at the border. Consequently, the safest approach is to fix your paperwork before the cargo leaves China.
EORI, VAT, and Importer of Record
Every shipment entering the EU needs an பதிவின் இறக்குமதியாளர், often shortened to IOR. The IOR is the legal party responsible for duties and import VAT. For most Amazon sellers, that is either their own company or a licensed representative acting on their behalf.
To act as IOR, you need an EORI number, which identifies you to EU customs. You also need a German VAT number if you store stock in Germany, and foreign companies face no turnover threshold for this. Note that an EORI is not a VAT number, so one cannot replace the other.
Your commercial invoice, EORI, VAT ID, and delivery terms must all match. If they do not, customs may hold the cargo, or Amazon may be unable to verify the consignee. In addition, keep proof of import for your VAT return, because it supports the recovery of input VAT.
GPSR Responsible Person and Product Safety
The General Product Safety Regulation requires an EU-based Responsible Person for products sold in the EU. Their name and contact details must appear on the product, its packaging, or an accompanying document. They must also appear on the online listing. Without this information, Amazon can suppress the listing and reject inbound units.
CE marking does not replace GPSR. For regulated categories such as toys, electronics, and radio equipment, you also need the correct conformity documents and test reports. Meanwhile, a freight forwarder can check labels at loading, but it cannot act as your legal Responsible Person. Hire a specialist provider for that role.
Packaging, Battery, and Electronics Registrations
Germany requires packaging registration in the LUCID register before your first sale, with no minimum volume. The EU packaging regulation PPWR began applying on 12 August 2026. Current guidance says that foreign producers selling into Germany must appoint an authorised representative. Keep in mind that a LUCID number covers Germany only, so other EU countries need their own registrations if you ship stock there.
Electronics sellers carry extra duties. WEEE registration applies to electrical items, and separate battery rules apply to products with cells. Amazon can deactivate listings when valid numbers are missing. For that reason, collect every registration number before production ends, not after the goods are on the water.
How the Amazon.de Inbound Workflow Works
Every FBA shipment starts in Seller Central. You create an inbound plan through the Send to Amazon workflow, confirm unit quantities, enter packing details, and receive a shipment ID. Amazon then assigns one or more destination fulfillment centers based on the placement option you select.
Placement choices matter for freight. If you accept Amazon’s optimised split, your cargo may need to go to several German fulfillment centers. If you choose a single destination, Amazon may charge a placement fee instead. Either way, decide before booking, since carton-level data determines how the forwarder builds pallets and trucks.
Once the plan is confirmed, you print FNSKU labels for units and box ID labels for cartons. Each carton must carry the right shipment ID. After that, you choose how to move the goods to Germany, usually by a pallet carrier or by sea and air freight when the cargo starts in China.
For China cargo, the typical route is ocean or air freight to a German or nearby EU port, customs clearance, and then trucking to the fulfillment center. This sequence has one important consequence. The label data you create in Seller Central must reach the factory early. Otherwise, the goods are packed first and relabelled later, which is slow and costly.
Carton, Pallet, and Labeling Rules
Amazon’s physical rules are strict. Although limits can vary by program and category, the table below shows typical figures for Amazon.de inbound. Verify each one in Seller Central before production starts.
| பொருள் | வழக்கமான தேவை | ஏன் முக்கியம் |
| அட்டைப்பெட்டி எடை | Up to about 15 kg; heavier only for single large items, marked clearly | Protects warehouse staff. Overweight cartons can be refused. |
| Longest carton side | About 63.5 cm for standard cartons | Oversized cartons slow handling and may be rejected. |
| Carton contents | One SKU per carton is preferred | Mixed cartons need clear labels and raise error risk. |
| பாலேட் தடம் | 120 x 80 cm or 120 x 100 cm | Fits Amazon dock equipment and trailers. |
| பாலேட் உயரம் | Around 1.8 m including the pallet | Keeps loads safe and stackable. |
| தட்டு நிலை | Sound four-way pallet, stretch-wrapped, no overhang | Damaged or leaning pallets can be turned away. |
| லேபிள்கள் | FNSKU on each unit, box ID on each carton, pallet labels as instructed | Unreadable or missing labels cause rework fees and delays. |
Labeling errors are among the most common reasons for delays. A barcode that will not scan, a missing shipment ID, or an old barcode left uncovered can trigger rework charges or unit refusal. Furthermore, labels must sit on flat surfaces, away from seams and edges, so that scanners can read them first time.
Prepare at the Factory, Not in Germany
Fixing problems in Europe is expensive, so prepare as much as possible at origin. Ask the factory to apply FNSKU labels, add suffocation warnings to polybags where required, and pack fragile goods so they pass a drop test. Also confirm that the manufacturer name, importer details, and Responsible Person information are printed correctly.
A short pre-shipment inspection helps too. Check carton marks, barcode scanning, and unit counts on a sample of cartons, then take photos. Later, these photos become useful evidence if Amazon disputes a receiving discrepancy.
Pallet Building Tips That Prevent Refusals
Pallets are where cargo meets the real world. Place heavier cartons at the bottom and lighter ones on top. Keep every carton inside the pallet edge, because overhang is a frequent cause of damage. Then wrap the stack tightly with stretch film so it survives braking and kerb vibration.
Each pallet should hold cartons of the same shipment and, ideally, the same SKU. Mixed pallets are slower to receive and easier to get wrong. Also, leave the carton labels visible through the wrap, and attach pallet labels exactly as the instructions say. A pallet that cannot be scanned at the dock may simply be refused.
Choosing the Right Shipping Mode from China to Germany
No single mode suits every seller. The right choice depends on stock level, margin, and how soon you need the goods in the warehouse. The table below compares the four options we most often quote for Amazon.de cargo.
| முறையில் | வழக்கமான வீட்டுக்கு வீடு வருகை நேரம் | சிறந்தது | கவனிக்கவும் |
| கடல் FCL | 35 to 50 நாட்கள் | Large, steady replenishment | Needs enough volume; splitting to several fulfillment centers adds trucking. |
| கடல் எல்.சி.எல். | 40 to 55 நாட்கள் | நடுத்தர அளவிலான ஏற்றுமதிகள் | Consolidation and devanning add handling time. |
| விமான சரக்கு | 5 to 10 நாட்கள் | அவசர மறுநிரப்புதல்கள், அதிக மதிப்புள்ள பொருட்கள் | Higher cost, volumetric weight, battery restrictions. |
| ரயில் | 18 to 30 நாட்கள் | வேகம் மற்றும் செலவு சமநிலை | Limited origin terminals and cargo restrictions. |
Treat these times as indicative. Port congestion, peak season, and routing disruptions can add days or weeks. For example, when ocean carriers sail around Africa instead of using the Suez Canal, transit can stretch by one to two weeks.
Many sellers mix modes. They send the bulk by sea for cost reasons and ship smaller air consignments to avoid stockouts. Likewise, sea LCL often beats waiting to fill a full container, because stock reaches Amazon sooner. Topway Shipping offers both FCL and LCL ocean freight from China to major ports worldwide, so sellers can match the mode to their stock level instead of forcing a container size.
Air freight needs one extra check. Carriers charge by the higher of actual weight and volumetric weight, and the usual formula divides length times width times height in centimetres by 6,000. Carton design therefore influences freight cost for years, so review packaging dimensions before the first production run.
Customs Clearance: Where Most China Shipments Stall
Customs is the stage where good plans fail quietly. The cargo may arrive on time, yet it can wait for days because one document is wrong. Fortunately, most holds are avoidable with careful preparation.
முக்கிய ஆவணத் தொகுப்பு
Every consignment needs a consistent set of documents. The table lists the essentials and the mistakes we see most often.
| ஆவணம் | நோக்கம் | பொதுவான பிழை |
| வணிக விலைப்பட்டியல் | Declares value, goods, and Incoterm | Vague descriptions or unit prices that do not match the packing list |
| பொதி பட்டியல் | Lists cartons, weights, and dimensions | Carton counts that differ from the Amazon plan |
| பில் பில் அல்லது ஏர் வே பில் | போக்குவரத்து ஒப்பந்தம் மற்றும் அனுப்பப்பட்டதற்கான சான்று | தவறான சரக்கு பெறுநர் அல்லது அறிவிக்கப்படும் தரப்பு |
| EORI மற்றும் VAT எண்கள் | Identify the importer | Using the wrong legal entity |
| Certificates (CE, test reports, origin) | Prove compliance and support duty claims | Missing papers for regulated categories |
| Power of attorney for broker | Lets the broker file the declaration | Unsigned or out of date |
Consistency is the real key. The invoice, packing list, and Amazon shipment plan should tell the same story about quantities, weights, and product names. If one differs, customs may query the entry and Amazon may question the delivery.
HS Codes, Valuation, and Duty
Each product needs the correct tariff code. In the EU, goods are classified to an eight-digit code, and the duty rate depends on that code and on the origin. Some Chinese goods also face additional anti-dumping duties, so check the tariff database before you set your landed cost. Classification errors can lead to back-payments and penalties, which is why an experienced broker is worth the fee.
The declared value must also reflect the price actually paid. EU customs authorities have been watching undervaluation closely, particularly for goods from China. In addition, customs value usually includes freight and insurance up to the EU border, a basis known as CIF. Plan your numbers on that basis from the start.
Import VAT is the other major cost. Germany’s standard rate is 19%, with a reduced rate for some goods. If you are the importer and hold a valid VAT number, you can generally recover this VAT through your return. Even so, the cash is due at clearance unless you have a deferral arrangement, so factor it into your working capital.
Incoterms: Who Pays What at the Border
The Incoterm on your supplier contract decides who handles customs and who bears the cost at each stage. Under FOB, the supplier delivers the goods onto the vessel, and you take over from there. Under DAP, the seller delivers to a named place but does not clear customs. Under DDP, the seller also pays duties and import VAT.
For Amazon.de FBA, most experienced sellers prefer to control the import themselves. They buy FOB or FCA, appoint their own broker, and act as the Importer of Record under their own EORI and VAT number. This keeps the VAT paper trail in their name, which matters when they reclaim input VAT. By contrast, a supplier-arranged DDP shipment can leave the seller without proper import VAT documents.
There is one more reason to be careful with DDP. When the supplier or an unknown agent clears the goods, the consignee data may not match your Amazon account. As a result, the receiving team cannot link the shipment to you, and customs may question who the real importer is. If you must use DDP, agree in writing who acts as IOR and who receives the import VAT documents.
Pre-Arrival Security Data (ICS2)
Under the ICS2 system, carriers and forwarders must submit security data before cargo reaches the EU. For containerised sea freight, that filing is due 24 hours before loading at the origin port. Descriptions such as “gifts” or “accessories” are not accepted, because they do not identify the goods. Therefore, send your forwarder precise product descriptions and HS codes early, preferably when you request the quote.
Direct-to-FBA or Staging First: Which Route Fits You?
Sellers face a basic routing choice. They can send cargo straight from the port to the Amazon fulfillment center, or they can stage it at a warehouse first. Both models work, but they suit different situations.
Direct delivery is the cheapest and fastest option when everything is perfect. The cartons are labelled at the factory, the pallets meet Amazon’s specifications, and a single fulfillment center receives the whole load. In that case, an extra stop only adds cost.
Staging makes sense in several cases. For example, your cargo may be split among multiple fulfillment centers, or you may need to relabel units after a late change. You may also want to hold stock until an appointment slot opens, or inspect goods that arrived from several suppliers. A staging warehouse near the port gives you control over all of these steps.
Cost and time must be weighed against risk. A staging stop typically adds handling fees and one to three days. However, a refused delivery can cost far more, because the cargo may need to be collected, repaired, and booked again. As a rule, new sellers and complex products benefit from staging, while experienced sellers with stable products can usually go direct.
Topway Shipping can support both models. Our overseas warehousing and last-mile delivery services let us hold, check, and forward your cargo, or deliver it straight to the fulfillment center when the load is ready.
Final Mile: Delivery Appointments and Receiving
After customs release, the cargo travels by truck to Amazon. Most pallet deliveries require a booked appointment slot. A truck that arrives without one may be turned away or wait for days. For this reason, your forwarder or trucker should confirm the slot as soon as the arrival date is firm.
Delivery windows are short, so the paperwork must be in the truck. Carry the shipment ID, pallet labels, and carrier details. If the shipment is split across several fulfillment centers, each destination needs its own labelled pallets and its own appointment.
Receiving is not instant either. Even after delivery, it can take days or sometimes weeks for units to show as available, especially during peak season. Plan buffer stock accordingly. Moreover, check the receiving status daily and respond quickly to any discrepancy notice, because claim windows are limited.
The port of discharge also affects cost and timing. Most Asia-Europe cargo for Germany arrives through Hamburg, Bremerhaven, or Rotterdam, and then moves inland by truck or rail. Because Amazon.de fulfillment centers are spread across the country, from Bad Hersfeld and Leipzig to Werne and Koblenz, the inland leg can vary a lot. Ask for a quote that shows the port, the inland haulage, and the delivery separately, so you can compare offers fairly.
Some sellers add an EU prep center or bonded warehouse as a middle step. This gives them a place to fix labels, split pallets, and time the appointment properly. It adds a handling fee, yet it often costs less than a rejected delivery.
Reading Receiving Status and Fixing Discrepancies
Once the truck is unloaded, your work is not finished. Amazon scans each carton and compares the contents with your plan. The shipment then moves through statuses such as in transit, delivered, checked in, and receiving. Knowing what each stage means helps you decide when to worry.
Discrepancies appear when the received quantity differs from the planned quantity. The cause may be a counting error at the factory, a lost carton, or a mislabelled unit. Therefore, compare the Amazon report with your packing list, factory photos, and delivery receipt as soon as the numbers appear.
If a real shortage exists, open a case with clear evidence and do it quickly. Claim windows are limited, and weak documentation is the usual reason claims fail. Attach the packing list, carton photos, and proof of delivery. In addition, note the shipment ID and box IDs in every message, so that support staff can find the cargo without delay.
Over time, track discrepancy rates by supplier and by route. If one factory repeatedly ships short or mislabels cartons, fix the process at origin or change the supplier. This simple habit protects your margin more than almost any freight negotiation.
What It Really Costs: A Sample Landed-Cost Calculation
Sellers often ask for a simple answer to the question, “How much will duty and VAT be?” The honest answer is that it depends on the product. Still, a worked example helps. The table below assumes goods worth €20,000 at FOB, freight of €1,800, insurance of €60, and an illustrative duty rate of 4%.
| செலவுக் கோடு | தொகை (EUR) | குறிப்பு |
| பொருட்களின் மதிப்பு (FOB) | 20,000.00 | Price paid to the supplier |
| சர்வதேச சரக்கு போக்குவரத்து | 1,800.00 | Port to port or door to port, as quoted |
| காப்பீடு | 60.00 | சரக்கு காப்பீட்டு பிரீமியம் |
| சுங்க மதிப்பு (CIF) | 21,860.00 | வரிக்கான அடிப்படை |
| 4% இறக்குமதி வரி | 874.40 | Assumed rate; check your own HS code |
| இறக்குமதி வாட் அடிப்படை | 22,734.40 | சுங்க மதிப்பு மற்றும் வரி |
| ஜெர்மன் இறக்குமதி மீதான மதிப்புக்கூட்டு வரி 19% | 4,319.54 | Generally recoverable for the importer |
| Total payable at import | 5,193.94 | வரி மற்றும் வாட் வரி |
Note what the table leaves out. Customs brokerage, terminal handling, trucking, and appointment costs add several hundred euros on top, depending on the route and volume. Of these figures, the duty and the local charges are true costs, while the VAT is a cash-flow item you reclaim later. Separating the two gives you a more accurate margin.
Special Categories That Need Extra Care
Certain product types attract more scrutiny than others, both from customs and from Amazon. If your catalog includes any of them, add time to your schedule.
Batteries and battery-powered goods are the biggest source of surprises. Lithium cells are classed as dangerous goods for air and sometimes sea transport. They need correct test summaries, packaging, and declarations. Air carriers can refuse unmarked battery cargo outright, so declare it when you request the quote.
Electronics and radio equipment must meet CE and related directives. In addition, they need WEEE registration in Germany and the correct manufacturer and Responsible Person marking. Toys, children’s products, and personal protective equipment also face tighter conformity checks, with test reports that name the exact model.
Cosmetics, food contact items, and textiles bring their own labeling rules. Cosmetics require an EU Responsible Person and a safety report. Food contact materials need a declaration of compliance. Textiles need fibre composition labels in the correct language. None of this is unusual, yet each rule can block a listing if it is missed.
A final tip concerns supplier management. Many inbound problems start with a supplier who does not understand Amazon’s rules. Send the factory a one-page packing brief that shows the label position, carton limits, and marking requirements. Then ask for a sample carton photo before mass packing begins. This small step often prevents thousands of units from needing rework.
The practical advice is to check your category requirements in Seller Central before you place a purchase order. Ask the factory for test reports early, and share them with your forwarder. That way, the clearance team can prepare the entry correctly and avoid questions at the border.
Common Inbound Mistakes and How to Avoid Them
The first mistake is booking freight before the Amazon plan is final. When quantities or box contents change after the factory has packed, relabelling can delay the whole shipment. Lock the plan first, then send the carton data to the factory.
The second is inconsistent paperwork. Quantities on the invoice, the packing list, and the Amazon plan must match exactly. Even a small difference in unit count can prompt a customs query or a receiving discrepancy.
Third, many sellers underestimate GPSR. Listings are suppressed when Responsible Person data is missing, and units can be rejected at receiving. Print the details on the product or packaging, and make sure the listing matches.
A fourth risk is undervaluing goods to save duty. It rarely works. Customs systems compare declared values against market data, and a mismatch can lead to inspections, fines, and long delays. Declare the real price and plan your pricing around it.
Finally, dangerous goods are often overlooked. Items with lithium batteries, magnets, aerosols, or liquids may need special declarations and packaging. If a hidden battery appears at the port or the airline, the cargo can be refused, so tell your forwarder about every special feature of the product before booking.
Cargo Insurance, Claims, and Peak-Season Planning
Insurance is easy to skip and painful to lack. Standard carrier liability for ocean freight is very low compared with the value of a typical FBA load. Therefore, buy all-risk cargo insurance based on the full invoice value plus freight. The premium is usually small relative to the goods, and it covers damage, loss, and general average claims.
Claims depend on evidence. Keep the factory loading photos, the sealed container number, the delivery receipt, and any damage notes made by the driver. If cartons arrive crushed or wet, note it on the proof of delivery before the truck leaves. Without that note, a claim becomes much harder to win.
Peak season deserves its own plan. In the weeks before Black Friday and Christmas, ocean space tightens, rates rise, and Amazon appointment slots fill quickly. Many sellers therefore ship their holiday stock earlier than they think necessary. A good rule is to have the goods checked in at Amazon well before the sales period starts, not on the eve of it.
Finally, communicate often. Ask your forwarder for milestone updates, including cargo ready, vessel departure, arrival, customs release, and appointment confirmation. Short, regular updates let you react early, for instance by moving an air shipment forward when a sea delay appears.
How Topway Shipping Supports Amazon.de FBA Shipments
Topway Shipping, headquartered in Shenzhen, has provided cross-border e-commerce logistics solutions since 2010. Our founding team brings more than 15 years of experience in international logistics and customs clearance, with a strong focus on China–U.S. transportation. While our roots lie in that lane, the same discipline around documentation and clearance applies when we plan cargo to major ports worldwide.
Our services cover the whole chain. That includes first-leg transportation, overseas warehousing, customs clearance, and last-mile delivery. We also run flexible FCL and LCL ocean freight services from China to major ports worldwide. For an Amazon.de seller, this means one partner can collect goods from several suppliers, consolidate them, match carton data to your inbound plan, book the ocean leg, coordinate clearance, and arrange delivery.
The best results come from early contact. Share your shipment plan, draft invoice, packing list, and compliance documents before the cargo is ready. We can then review the details with you and flag mismatches while they are still easy to fix. To start, you can request a quote from Topway Shipping and describe your product, volume, and target fulfillment center.
A Practical Pre-Shipment Timeline
Good inbound shipping is mostly good scheduling. The table below shows a workable sequence for a sea shipment, counted back from the cargo ready date.
| டைம்ஃப்ரேம் | செயல் | யார் வழிநடத்துகிறார்கள் |
| 6 to 8 weeks before ready date | Confirm EORI, VAT, GPSR Responsible Person, and packaging registrations | விற்பனையாளர் |
| 4 முதல் 6 வாரங்களுக்கு முன்பு | Create the Send to Amazon plan; send carton data and labels to the factory | விற்பனையாளர் மற்றும் தொழிற்சாலை |
| 3 முதல் 4 வாரங்களுக்கு முன்பு | Book freight; share draft invoice, packing list, and product descriptions | விற்பனையாளர் மற்றும் அனுப்புநர் |
| தயாராக தேதி | Inspect, photograph, and load the cargo | தொழிற்சாலை மற்றும் அனுப்புநர் |
| நடு வழியில் | File security data, pre-check customs entry, request delivery appointment | முன்னோக்கி |
| வருகை | Clear customs, pay duty and VAT, deliver to the fulfillment center | அனுப்புநர் மற்றும் தரகர் |
| பிரசவத்திற்குப் பிறகு | Monitor receiving and respond to discrepancies | விற்பனையாளர் |
Adjust the dates for your product and season. Peak months, such as the weeks before Black Friday and Christmas, need extra buffer for both freight space and appointment slots. Starting early is the cheapest insurance you can buy.
தீர்மானம்
Delivering China cargo to Amazon.de FBA in 2026 rewards preparation. The €3 duty on low-value parcels grabbed the headlines, but bulk FBA freight still depends on the basics: a valid importer, correct HS codes, consistent documents, compliant labels, and a booked delivery slot. Add GPSR, packaging registration, and ICS2 data to the list, and the picture is clear. Problems that start at the factory are the hardest and most expensive to fix in Germany.
If you build the compliance foundation first, prepare cartons at origin, and choose a shipping mode that fits your stock, most inbound delays disappear. A forwarder with solid customs experience can then keep the process on track. Topway Shipping is ready to support your next China-to-Germany shipment, from first-leg transport to last-mile delivery.
அடிக்கடி கேட்கப்படும் கேள்விகள்
Q: Does the new €3 EU duty apply to my FBA pallets?
A: No. The flat duty targets low-value consumer parcels sent directly from outside the EU. FBA pallets are commercial imports, so they pay the regular duty for their HS code plus import VAT.
Q: Do I need a German VAT number to ship to Amazon.de FBA?
A: In most cases, yes. Storing stock in a German fulfillment center normally creates a VAT registration duty, and foreign sellers face no turnover threshold. Confirm the details with a tax adviser.
Q: Can my freight forwarder act as my GPSR Responsible Person?
A: Usually not. A forwarder can check labels and flag missing information, but the legal Responsible Person role should go to a specialist compliance provider established in the EU.
Q: Should I ship by sea or by air to Amazon.de?
A: Use sea freight for planned replenishment because it costs less per unit. Use air freight for urgent restocks or high-value goods. Many sellers combine both to balance cost and availability.
Q: What happens if my truck misses its delivery appointment?
A: Amazon may refuse the delivery or ask you to rebook. Rebooking can add days and extra trucking or storage fees, so confirm the slot early and track the truck.